G10 Sheet
G10 is a very durable composite material that comes in a variety of sizes and bold vibrant colors and color combinations. It is made with glass fiber and epoxy which is compressed under extremely high pressure and heat cured to provide an extremely tough and durable material. It is available in sheet, rod and block form.
Fiberglass boards make excellent non-corrosive backing plates for high load deck hardware or bond to engine room bulkheads to hold mounting brackets. G10 boards are sold in 1/4 and 1/2 inch thickness.
G-10 is similar in strength and density to starboard, but because it is formed from epoxy resin, it bonds easily using most two-part epoxies.
- FR-4 Grade fire resistance
- Low moisture absorption
- Rated to 285 F continuous operating temperature, will not melt at high heat
- Resists chemicals
- High impact strength
- High tensile strength
- High dielectric strength
- High flex strength and dimensional stability
Size: 1020mm * 1220mm, 1020mm * 2040mm, 1220mm * 2440mm
Color: Yellow, Natural, Green, Black, White, etc.
Length, width, thickness, and diameter tolerances vary by size, by manufacturer, brand, and grade. Custom sizes and colors available upon request.
FR-4 Glass Epoxy Laminate, often simply referred to as FR4, has become a popular material in various industries due to its excellent strength, durability, and flame resistance.
FR4, G10, and G11 are all common materials used in the electronics and industrial fields, particularly in the manufacture of printed circuit boards (PCBs) and insulation applications.
The density of FR4 material is approximately 1.85 g/cm³. This is an average value, and the exact density can vary slightly depending on the specifics of the FR4 formulation used.
